< Back to Main

Electromagnetic lock
The magnetic lock consists of a magnet mounted onto door frame and a steel plate attached to the top of the door.  The door will be strongly bonded when the magnet is energized holding the steel plate. 

The holding force strength varies depending on model.  There is also a few different types of mounting bracket depending on the type of door and installation condition.

General feature:

Easy installation

Low energy consumption (DC 12V / 24V)

Silent and continuous duty operation

Applicable to wide variety of swing and sliding door

Interface seamlessly to Soyal controller readers

Instantaneous release in the event of emergency
 

Brochure

	300-S 300 lbs holding force For smaller and light door.   Specification
	600-S 600 lbs holding force Most commonly used on typical standard size door .   Specification
	600-LED 600 lbs holding force with LED indicator Most commonly used on typical standard size door. Safety feature: LED will be GREEN color is the door is closed properly.  Otherwise, LED will be RED color.  Specification
	MORTICE 600 lbs holding force concealed mounting Entire EM lock unit is embedded during installation.  Suitable for sliding door.   Specification
	1200S 1200 lbs holding force For bigger and heavier door.   Specification
	1200LED 1200 lbs holding force with LED indicator For bigger and heavier door. Safety feature: LED will be GREEN color is the door is closed properly.  Otherwise, LED will be RED color.    Specification
	600 - double 600 lbs holding force double lock Double lock is used on double leaf swing door.  One lock for each leaf.  Both magnet are housed in rigid bracket symmetrically opposite to each other for better cosmetic appearance. Specification
	600LED - double 600 lbs holding force double lock w/LED indicator Double lock is used on double leaf swing door.  One lock for each leaf.  Both magnet are housed in rigid bracket symmetrically opposite to each other for better cosmetic appearance. Safety feature: LED will be GREEN color is the door is closed properly.  Otherwise, LED will be RED color.  Specification
	DH1224 Magnectic Door Holder Fail safe. Dual voltage 12 (100mA/24V (50mA). Holding force 150 lbs. Built in release button. Specification