| Alarm / PARADOX wired alarm main
equipments |
< Back to
Main |
DIGIPLEX series
DIGIPLEX EVO systems provide the highest level of
protection for banks, high-security military and government
sites, luxurious residential homes and any place where maximum
security is essential.
These systems are designed to be easy to use and the modular
concept of these systems provide installers with labor-saving
features that make expanding, installing and servicing these
systems quick and convenient.
Digiplex EVO systems are the logical solution to provide highest
security for the most demanding installations.
Brochure
|
Digiplex Series Booklet
Control panel
General feature:
Automated security - system armed
automatically everyday at pre-set time
Built it access control features
Lights can be turn on randomly to
make it seemed like someone at home
User friendly - 8 one touch key to
perform your daily action
Protect separate area independently
under one system
NEware software allow complete
system monitoring from PC
|
 |
EVO48
8 zone alarm control panel set
8 on-board zone inputs (16 with zone doubling) expandable
to 48 zones via 4-wire com bus. 4 independent partition
control.2 on-board solid PGM outputs.Supports up
to 127 expansion module.
|
|
|
 |
EVO192 panel set
8 zone alarm control panel set
8 on-board zone inputs (16 with zone doubling) expandable
to 192 zones via 4-wire com bus
8 independent partition
control.
5 on-board solid-state PGM outputs.Support up to 254 expansion bus
module.
|
|
Keypad
General feature:
1 keypad zone input
Independent set chime zone
3 keypad-activated panic alarm
Adjustable backlight
 |
DNE-K07 Keypad with 32 character LCD display Graphica LCD keypad with built in graphic LCD. Able
to display up to 32 floor plans. 3 One-Touch action
buttons.Details |
|
 |
EVO641 Keypad with 32 zone Blue LCD display 32-character LCD with programmable labels. Assign to
one or more partitions. 14 one touch action buttons.
Details |
|
 |
DGP2-648BL Keypad with 48 zone LED display 4 partition LED display. Assign to one or more
partitions. 14 one touch action
buttons.Details |
|
 |
DDGP2-ANC1B Annunciator module LED display shows the status of either partitions 1-8,
zones 1-48, or zones 49-96. 3-in-1 product (comes with
three different display labels)
Mount as a stand-alone unit or over any LCD or LED keypad
module. Stack up to three annunciators. Assign to one or
more partitionsDetails |
|
Zone expansion module
 |
ZX4
4 zone expansion module
Max 8 zone with ATZ doubling features enabled. Supports
adjustable zone speed.
|
|
 |
ZX8
8 zone expansion module
Max 16 zone with ATZ doubling features enabled. Supports
adjustable zone speed.
|
|
PGM expansion module Add more Programmable output into standard panel.
 |
APR3-PGM4 4
relay module Rated 5A for activation/deactivation for any device. |
|
Accessories
Supporting peripheral to DIGIPLEX system.
|
RTX3
32 zones wireless expansion module
Allows you to add more zones using wireless Paradox's
sensors. Support MG-2WPGM, MG-RPT1, 1 PGM and signal
strength display. Also act as receiver for MG-REM1
and REM2 remote control.
|
|
 |
MG-RPT1
Wireless Repeater
Extend up to 75 meter wireless coverage. |
|
 |
MG-REM1
Remote Control
Use the remote control to arm/disarm or turn on
lights (using PGM). 4-button remote. Water resistant,
stylish clear blue plastic backlight for buttons.
Wireless range 45meter. Come with 3V lithium battery. |
|
 |
MG-REM2
Bi-directional remote control with sound
Built in transceiver. Display system status using visual
(LED) and auditory feedback. Able to receive system
status by pressing status button. Perform up to 6
different actions. |
|
 |
DNE-CONV21
PC interface
RS485/RS232 converter kit. Connect from Digiplex panel to
PC serial port (DB9). Support communication up to max
300m (1000 ft). |
|
 |
DP2-TM1
Time module
Use with DGP848 to keep time and date during total power
loss |
|
 |
307USB
PC interface
Connect from Digiplex panel to PC serial port (DB9) or
USB. Support communication up to max 60m (200 ft). |
|
| |