X Close

PCS200
GPRS Communicator Module

 

Feature highlights:

1. Alternative dialer to call to CMS for alarm reporting in the event of main telephone line failure.
2. Can send SMS to user during alarm event to inform zoning. Also send SMS notification to user when someone arm or disarm the panel. Up to 16 cell phone
3. User can send SMS back to alarm panel to disarm the panel.
4. The PCS200 also help to monitor the control panel presence. If for any reason, the control panel is cut power or removed by intruder causing loss communication to PCS200, PCS200 will send notification out to CMS. EXTRA DOUBLE SAFETY !!
5. Using our Paradox software, you can even get alarm log or download settings from your office PC to the alarm panel via GSM network. You can configure zone sensitivity settings, zone assignment, delay time.. etc.. through GSM network

 These feature is very useful on top of the CMS service. When alarm trigger, your CMS service will inform the main person. But all the manager or supervisor (up to16 cell phone) can also get SMS notification. Upon receiving warning from CMS station, the main person can SMS back to the panel to disarm the panel. Just to double check if it is a false alarm or real intrusion.

 

Standard feature:

Description	Parameter
Compatibility	EVO48 / EVO192 (V2.02) and K641 / K641R (V1.51), SP (V3.42) and K32LCD (V1.22)
GPRS Reporting	Report system events to the IPR512 Paradox IP Monitoring Receiver via GPRS.
Upload/Download via GPRS	Upload/download with WinLoad or NEware via a GPRS connection. GPRS allows internet communications through a GSM (cell phone) network at data rates of up to 38.8Kbit/s.
Firmware Upgrade via GPRS	The PCS200 or control panel firmware can be upgraded remotely via GPRS or directly on-site.
Report via text messages(SMS)	Select which event groups will send SMS messages to up 16 cell phones. Each text message contains event description, site name, date, time and any associated labels, such as area, zone and serial number. Event descriptions are pre-defined in the PCS200 module and are available in multiple languages (installer selectable).
Control panel communication supervision	The PCS200 will report to the monitoring station should there be a loss of communication with the control panel.
SImple installation	The PCS200 can be installed with a simple 4-wire serial connection up to 2m (8ft) from the panel. The module antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength.

 

Specification