< Back to Main

SPECTRA SP series
SPECTRA SP offers a combination of innovative features and an advanced communication bus for a unique expandable security system. Through its communication bus, Spectra SP can be expanded via wireless and hardwired expansion modules and a variety of accessory modules. 

Brochure | SP Series Booklet

Special feature:

Support VDMP3 for voice notification and remote arm/disarm

Support IP100 for email notification and check status from web

StayD function keeps you always protected

General feature:

Expandable maximum up to 32 zones and 16 PGM

Independent 2 partitions to allow independent programming and setting

Built in dialer to support CMS reporting (contact ID)

Telephone line supervision warn user if the line is disconnected.

False alarm prevention with Intellizones, Auto Zone shutdown and etc...

Keypad activated panic alarm

Control panel

	SP5500 panel set 5+1 zone alarm control panel set Onboard 5 zones input  + 1 keypad zones.
	SP6000 panel set 8+1 zone alarm control panel set Onboard 7 zones input  + 1 keypad zones.

Keypad

General feature:

8 one-touch action buttons

3 keypad-activated panic alarms

1 keypad zone input

Independent set chime zone

Connects to 4-wire expansion bus

	K10H Keypad with 10 zone LED display Simple and nice looking keypad.  User friendly with patented Key Light display (button lights up to indicate open zone). Details
	K32 Keypad with 32 zone LED display Higher end great looking keypad.  More user friendly - each zone is represented by individual LED. Details
	K32LCD Keypad with 32 character LCD display Easier operation and usage with LCD display.  Big classy LCD screen design project  impression of higher class alarm system of premium standard. Details
	K32RF Keypad with 32 zone Wireless LED Keypad Module Wireless range in a typical residential environment max 40m (130ft). Details

Accessories for SP Spectra Series

	ZX8SP 8 zone expansion module with 1 PGM Easily add 8 more zones to the panel to accommodate additional rooms. Each zone is a fixed zone and does NOT support adjustable zone speed.
	VDMP3 Voice dialer module VDMP3 can be programmed to call up to 5 telephone numbers. You will hear "voice" notification telling you which alarm zone triggered. You can also immediately arm/disarm, turn on lights or check alarm status from your mobile phone.
	PCS200 GPRS Communicator Module The PCS200 Communicator Module now supports GSM reporting through a GSM network to a landline monitoring receiver. With this added support the PCS200 can now send pre-recorded voice messages to a maximum of 8 phone numbers to report alarms using the Paradox Plug-In Voice module. End user can arm/disarm the system by sending a text message (SMS) to the PCS200 Details | Specification | Programming guide
	IP100 Internet Module IP100 Internet Module allow you to control and monitor your alarm from any  web browser anywhere in the world. IP100 will also sent email notification to you during alarm event. Details | IP100 Screen Shot
	RTX3 32 zones wireless expansion module Allows you to add more zones using wireless Paradox's sensors. Support MG-2WPGM, MG-RPT1, 1 PGM and signal strength display. Also act as receiver for  MG-REM1 and REM2 remote control.
	MG-RPT1 Wireless Repeater Extend up to 75 meter wireless coverage.
	MG-REM1 Remote Control Use the remote control to arm/disarm or  turn on lights (using PGM). 4-button remote. Water resistant, stylish clear blue plastic backlight for buttons. Wireless range 45meter. Come with 3V lithium battery.
	MG-REM2 Bi-directional remote control with sound Built in transceiver. Display system status using visual (LED) and auditory feedback. Able to receive system status by pressing status button. Perform up to 6 different actions.
	307 USB Direct Connect Interface Connects from control panel serial port connector to a PC's serial (DB-9) pr USB port.