Directional
Ceiling
Mount Detector
Paradome 466
How to use:
The Paradome 466 is a high performance infrared
motion detector designed to detect and differentiate
direction of movement and react accordingly. This is useful
in circumstances where you may wish to leave and re-enter a
protected area without triggering an alarm yet still enable
protection from intruders. For example, you wish to arm an
area such as an open balcony or patio door. The detector
uses two sensor to determine if motion is incoming or
outgoing.
Incoming movement
To satisfy the condition for an incoming movement
(intrusion), the Paradome 466 needs to detect movement only
across beam "A". Detection from beam "B" is not required.
When this occurs, the red LED illuminates for 3 seconds and
relay 1 reacts according to which jumper setting have been
enabled, unless this intrusion occurs during a return delay.
Outgoing movements
To satisfy the condition for an outgoing movement, the
Paradome 466 must detect movement across both sensor (beam
"B" and then beam "A") in succession. When this occurs, the
green LED illuminates for 3 seconds, relay 2 activates and
starts the return delay timer during which incoming
movements will be ignored. If movement is detected only
across beam "B", relay 2 will not activate.
Specification:
|
Description |
Paradome 466 |
|
Sensor type |
Dual element, low noise high sensitivity infrared |
|
Operating temperature |
-20°C
to +49°C (+4°F
to +120°F) |
|
Voltage input |
Typically 12V DC to 16V DC |
|
Current consumption |
Standby : 25mA, maximum : 35mA |
|
RFI
/ EMI rejection |
10V/m from 10Mhz to 1Ghz |
|
Alarm output |
100mA/28V DC, N.C. |
|
Temper output |
150mA/28V DC, N.C. |
|
Installation height |
2.1
m to 3.6m (7ft. to 12ft.) |
|
Detection speed |
0.2m/second to 3.5m/second
(0.65ft./second to 11.4ft./second) |
