Outdoor High Security Digital Motion
Detector
DG85
How to use:
The DG85 is designed for optimal performance at a height
of 2.1 meter (7ft.), but can be installed lower or higher.
After you have installed the detector, ensure that the
adjustable height marking on the upper right of the PCB's
cover inside the unit match the installation height.
For example, if the detector is installed at a height of 2.1
meter (7ft.), the PCB should then be adjusted to 2.1 meter
(7ft.) also. Align the desired marking (height) with the the
back cover's plastic tab.
If another installation height is called for, readjust the
PCB accordingly. Any PCB adjustments should be followed by a
walk-testing of the protected area. Walk-testing verifies
that the required coverage is in place.
Specification:
|
Description |
Digigard 85 |
|
Sensor type |
Dual
element infrared X2 |
|
Sensor geometry |
Rectangular |
|
Coverage |
11
meter x 11 meter (35ft. x 35ft.) 90°
viewing angle |
|
Installation height |
2
meter to 2.7 meter (7ft. to 9 ft.) |
|
Operating temperature |
-35°C
to +50°C (-31°F
to +122°F) |
|
Animal immunity |
40kg (90lbs) |
|
Voltage input |
9 to 16V DC |
|
Current consumption |
30mA maximum |
|
Lens |
2nd generation Fresnel lens, LODIFF®,
segments |
|
Alarm output |
From A relay 100mA / 28V DC, N.C. or optional from C
relay 5A / 28V DC, N.C./N.O. |
|
Anti
tamper switch |
150mA / 28V DC, N.C. |
|
RFI /
EMI rejection |
10V / m |
|
Detection speed |
0.2m/s to 3.5m/s (0.6ft./s to 11.5ft./s) |
|
Ingress protection level |
IP45 |
Brochure
|
Installation Guide
