|
Description |
Parameter |
|
Technology |
Inductive loop |
|
Tuning |
Automatic |
|
Detection mode |
Presence |
|
Presence time |
1 min to infinity (permanent presence) with 250
steps |
|
Pulse time output |
100ms or 500ms |
|
Inductance range |
20µH to 1000µH |
|
Frequency range |
20kHz to 130kHz |
|
Frequency steps |
4 for single loops
2 for dual loops (for each loop) |
|
Sensitivity (Δ
L / L) |
0.005% to 9.5% with 250
steps |
|
Reaction time |
25ms for single loop
50ms for dual loop (each channel) |
|
Setup time at power on |
8s max by channel |
Power supply (depending on
model) |
12-24 AC/DC
± 10%
230V AC
± 10%
90 --> 125 V AC ± 0% |
|
Mains frequency |
48 to 62 Hz |
|
Power Consumption |
<2.5 W |
Storage temperature
range |
-30°C to 70°C |
Operating temperature
range |
-30°C to +40°C |
|
Degree of protection |
IP40 |
2 Outputs relays (free
potential change-over
contact) |
max contact voltage : 230 VAC
max contact current : 5A
(resistive) |
|
LED indicators |
1 green LED : power
1 red LED : Loop status 1
1 red LED : Loop status 2 |
|
Protections |
Loop insulation transformer
zener diodes
gas discharge clamping |
|
Connection |
standard 11-pin round
connector 86CP11 |
|
Dimensions |
77mm (H) x 40mm (W) x 75mm
(D) |
|
Weight |
<200gr |
|
Product compliance |
R&TTE 1999 / 5 / EC
EMC 89 / 336 / EEC
UL listed equipment for UL 508 |
